Bộ xử lý Mark Levinson Digital Processor Nº30.6 (w/ PLS-330)

Thương hiệu:
   Mời bạn đánh giá sản phẩm *
  • /Images/Products/AmThanh_Org_cb6aa710-b.png /Images/Products/AmThanh_Org_2455e45d-e.png /Images/Products/AmThanh_Org_1be73063-5.png /Images/Products/AmThanh_Org_fd84fdec-3.png /Images/Products/AmThanh_Org_fd84fdec-3.png

Hãng sản xuất: Mark Levinson

Loại: Bộ vi xử lý âm thanh kỹ thuật số 

Liên hệ để có giá tốt
Giá trước đây
Tiết kiệm
HỖ TRỢ TRỰC TUYẾN

Bán hàng 1 0949 440 440

Bán hàng 2 0985 338 647

Bán hàng 3 0949 440 440

Dịch vụ chỉ có tại: AmThanh.Org
✔ Sản phẩm chính hãng
Bảo hành chính hãng, 1 đổi 1
✔ Uy tín hàng đầu
Một thành viên của Sao Mai Audio
✔ Vận chuyển siêu tốc
Giao trong ngày với hầu hết các mặt hàng
✔ Sản phẩm đa dạng
Từ Loa, Micro, Ampli, cho đến các loại Nhạc cụ
✔ Đại lý chính hãng của các thương hiệu nổi tiếng
Yamaha, OHM, JBL, Denon, Pionneer, Sennheiser, BMB, NEXO, Neutrik,...

Chi tiết sản phẩm

One of the advantages of a separate digital audio processor is that you can take the money which might have otherwise been spent on several built-in D/A converters and put it into one, superior processor which will enhance the performance of all the transports with which it is used. Ironically, many outboard processors fail to live up to this potential due to interference between their various digital inputs. The Nº30.6 provides outstanding isolation between its inputs, realizing the full potential of the various digital transports with which it is used. In fact, every source has its own dedicated digital interface receiver. As a result, the selected input effectively has the Nº30.6 “all to itself ” for its conversion to analog.


The Nº30.6 is fully balanced in both the analog and digital domains. All digital filtering and processing is implemented in a balanced configuration, and conversion to analog is accomplished in two opposing polarity 24-bit converters per channel. This approach maintains the integrity of the signal, reducing the opportunities for music-destroying noise and digital artifacts to enter the signal path.


Thông số kỹ thuật:­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­

Frequency response:

10Hz - 20kHz +0dB, –0.2dB

Total harmonic distortion:

0.001% @ 1 kHz, 0dB, A-weighted

Dynamic range:

98dB (or better)

Signal-to-noise ratio:

105dB

Channel separation:

Better than 110 dB

Intermodulation distortion:

Less than 0.005%

Digital/analog conversion:

Two custom 24-bit DACs

Digital filter:

16x oversampling

Analog filter:

Bessel-tuned, linear phase to 40kHz

Low-level linearity:

Deviation unmeasurable to below –70dB, approximately +1.7dB below –90dB (undithered, referenced to 0dB @ 1kHz)

Intelligent FIFO jitter:

under 20 ps, uncorrelated

Output impedance:

Less than 6Ω

Mains voltage:

100V, 120V, 220V, 230V 240V

Mains frequency:

50/60 Hz

Mains consumption:

72 watts

Input complement:

3 XLR-type female connectors, 2 RCA-type female connectors, 1 ST-type connector, 2 EIAJ-type connectors, 2 five-pin female DC connectors, 1 two-pin female DC connector, 2 RJ-45 communications ports, 1 RJ-45 PHASTLink® port

Output complement:

2 pairs XLR-type male connectors (analog), 1 pair RCA-type female connectors (analog), 2 XLR-type male connectors (digital), 1 EIAJ-type connector (digital), 2 RJ-45 communications ports, 1 RJ-45 PHASTLink® port

Connector complement:

PLS-330: 2 five-pin female DC connectors, 1 two-pin female DC connector, 1 IEC mains connector

Shipping weight:

40.37 kg (2 boxes)

Đánh giá & nhận xét cho sản phẩm Bộ xử lý Mark Levinson Digital Processor Nº30.6 (w/ PLS-330)

Mã xác thực(*)