• /Images/Products/AmThanh_Org_720b4e62-f.png /Images/Products/AmThanh_Org_b0199296-c.png /Images/Products/AmThanh_Org_ab66b091-a.png

Hãng sản xuất: T+A

Kích thước (WxHxD): 460 x 170 x 460 mm

Trọng lượng : 28 kg

 

Liên hệ để có giá tốt
Giá trước đây
Tiết kiệm
HỖ TRỢ TRỰC TUYẾN

Bán hàng 1 0949 440 440

Bán hàng 2 0985 338 647

Bán hàng 3 0949 440 440

Dịch vụ chỉ có tại: AmThanh.Org
✔ Sản phẩm chính hãng
Bảo hành chính hãng, 1 đổi 1
✔ Uy tín hàng đầu
Một thành viên của Sao Mai Audio
✔ Vận chuyển siêu tốc
Giao trong ngày với hầu hết các mặt hàng
✔ Sản phẩm đa dạng
Từ Loa, Micro, Ampli, cho đến các loại Nhạc cụ
✔ Đại lý chính hãng của các thương hiệu nổi tiếng
Yamaha, OHM, JBL, Denon, Pionneer, Sennheiser, BMB, NEXO, Neutrik,...

Chi tiết sản phẩm

The P 3000 HV is the audiophile High-End pre-amplifier of the series, and represents the universal control centre for the individual new HV machines. It is equipped with unique, newly developed technologies and innovative circuit designs. Its measured results, specification and sound quality represent the limit of what is physically feasible. The components and materials employed are uniformly of top quality, without any hint of compromise, and the workmanship of the case sets standards which are unmatched even by much more expensive equipment.
T+A Pre-amplifier P 3000 HV

The connector section on the back panel provides impressive evidence of the P 3000 HV’s uncompromising design and symmetrical double-mono construction. Both balanced and unbalanced sockets are available as outputs. There are four balanced inputs which alternatively can be configured as unbalanced types, plus two further unbalanced inputs and a recorder input. Input No. 4 can be operated in surround (pass-through) mode in order to use the power amplifier for the front channels of a surround decoder. The analogue and digital mains power supplies are completely separate from each other, and even feature separate mains sockets! HV-Link (HV data bus), LAN socket, trigger input, RC-in for E-2000 and an ground terminal are also present. 
The P 3000 HV is equipped with a high quality headphone amplifier with dual current capability and is supplied complete with the F 3001 infrared remote control unit.

 

T+A Pre-amplifier P 3000 HV

In practical daily use problems often arise with room acoustics or loudspeaker positioning. To alleviate this difficulty we have developed an analogue signal processor module which not only offers tone and loudness functions operating separately for each channel, but also features three narrow-band parametric equalizers which are capable of effectively damping room resonances in the range from 20 Hz to 500 Hz. The net result is that superb sound quality can be obtained even in difficult rooms. As you would expect, these functions can also be completely by-passed by means of relays.
Upon request the P 3000 HV can be fitted with High-End phono pre-amplifiers, which possess different circuit topologies for MM or MC pick-up systems.

 

T+A Pre-amplifier P 3000 HV

 

Thông số kỹ thuật:

Frequency responce:

0,5 Hz – 300 kHz (+ 0/ – 3 dB)

Signal : noise ratio:

108 / 112 dB

Total harmonic distortion:

< 0,001%

Intermodulation:

< 0,001 %

Channel separation:

> 108 dB

Input sensitivity:

High Level (RCA): 7 x 250 mVeff ... 9 Veff / 20 kOhms. Balanced (XLR): 4 x 500 mVeff ...  18 Veff / 5 kOhms

Headphones:

50 Ohms

1 x Recorder:

250 mVeff / 100 Ohms

PRE out RCA:

Nom 1 Veff, Max 9,5 Veff / 50 Ohms

PRE out XLR:

Nom 1,45 Veff, Max 19,6 Veff / 50 Ohms

Reservoir capacity:

150000 µF

Standby:

< 0,5 W

Dimensions (W x H x D):

460 x 170 x 460 mm

Weight:

28 kg

Sản phẩm được xem cùng

Đánh giá & nhận xét cho sản phẩm Bộ tiền khuếch đại T+A Pre-amplifier P 3000 HV

Mã xác thực(*)